Panel Saw Features

• New Milwaukee 3-1/4 hp saw motor that can use either 7-1/4"
  or 8-1/4" saw blades.
• On/Off Paddle Switch for motor control (no trigger lock to lose).
  
• 1-1/2" Square Tubular Frame, 5', 7 1/2', or 10' that is fully welded and powder coated.
• General Purpose carbide saw blade.
• Carriage Return, that does not have to be assembled by you.
• Cord Holder.
  
• 1-3/4" Nickel Chromed Track Tubes that are 1/8" thick.
• Fence Floor Support Plate.
• A backer board, for support, which does not have to be removed to rotate the saw plate 90 degrees.
• Factory Squared, Aligned, and Secured so your Panel Saw is Always in Square.
• Foldable Stand and Wheels with Quick Release Pins.
• Steel Hubs for Material Wheels.
• Retraction Lock to prevent accidental movement of carriage plate.
• Strip Plate to support cutting of small materials.
• Enclosed Dust / Safety Shield with Dust Brush and Vacuum Hose.
  
• Rotating Saw Plate (pull two spring pins to rotate).
  
• On/Off Paddle Switch for motor control.
  
• 1 - Year Warranty on Parts.

• Milwaukee 10" Saw Motor Replacement for new or existing Panel Saw Frames with the Rotating Saw Plate and Enclosed Dust / Safety Shield.
• Universal Router Plate.
• Full Intermediate-Fence that stretches across the entire frame.
• Intermediate Fence Tape System with Quick Stop.
• OLFA Knife Cutter Plate able to rip and crosscut (Patented).
• 6 Pack replacement blades for Knife Cutter.
• Vertical Tape System with Rip Gauge.
• Horizontal Tape System with adjustable Quick Stop.
• Horizontal Flip Stop System, 5' or 8' lengths.
• Extra Track Tube Bearings.
• Frame Extensions for either side.
• Additional Adhesive Backed Tapes.
• Spring Hold Down Bar.